Operating Instructions for Linear Vibrating Fluid Bed Dryers

How is the linear vibration Fluidized Bed Dryer used? In actual use, it is necessary to master the appropriate operating specifications, so as to ensure the correct operation of the linear vibration Fluidized Bed Dryer and make the equipment longer service life, So how to do it.

Preparations before starting the linear Vibrating Fluidized Bed Dryer:

First check the equipment to ensure that the equipment is in good condition, then start it up, and then adjust the excitation force of the vibration motor to make the machine reach the required amplitude (no adjustment is required under normal circumstances).

Operation and use of linear vibrating fluidized bed dryer:

The first step; open the steam valve, the instrument pressure reaches the specified value according to the requirements.

The second step: start the feeder to feed the material, so that the material is evenly distributed on the fluidized bed plate.

The third step; Shi Ke pays attention to the vibration of the fuselage and the temperature inside the fuselage to ensure that it is safe and sound.

Step 4: Always pay attention to the connection bolts to ensure that there is no loosening and falling off, and that each sealing surface has no leakage.

Step 5: If abnormal sound or vibration occurs during operation, stop immediately for inspection.

The sixth step; stop feeding, so that all the materials in the machine are processed.

Step 7: Close the steam valve, stop the air supply, stop the vibration motor, continue to ventilate for 5-10 minutes, turn off the blower, then turn off the induced draft fan, and finally turn off other auxiliary equipment.

In this way, one working process of the linear vibration fluidized bed dryer is over. Of course, after the shutdown, it is necessary to simply clean the surroundings of the linear vibration fluidized bed dryer and the equipment, so as to prolong the service life of the equipment.