Precautions for operation of high speed centrifugal spray dryer

The high-speed Centrifugal Spray Dryer has a high degree of automation, convenient operation and good product quality. It is suitable for solutions, emulsions, suspensions, and even liquid materials with viscosity. High-speed centrifugal Spray Dryer is one of the most widely used dryers in industrial production at present, which uses centrifugal atomizer to dry some liquid materials.

After the high-speed centrifugal spray Dryer is in normal operation, the materials should be received regularly, the operation of each system should be checked regularly, and the process parameters should be recorded.

At the end of the high-speed centrifugal spray dryer, the heating device should be turned off first, and the material liquid should be replaced with water to flush the residual material liquid in the material pipe, and then the material pump should be turned off. When the inlet temperature is reduced to below 100 ℃, the operation of the blower and the exhaust fan can be stopped. Then clean the residual material in the drying tower and the dust collector, close the dust collector and the air hammer, and finally turn off the main power supply to complete the production operation.

In case of emergency, the high-speed centrifugal spray dryer must be shut down immediately, and the blower and feed pump of the high-speed centrifugal spray dryer should be shut down first. In case of a sudden power failure, the tower body should be cooled naturally, and then the blowdown valve should be opened to drain the slurry in the slurry pipeline and clean the equipment.

During the operation of the high-speed centrifugal spray dryer, there are also some operations that need to be paid attention to. Therefore, we have summarized some related operations to realize them. Whether it is before the operation, the operation is stopped or during the operation, we all need us Do small things well.