Daily maintenance rules for linear vibrating fluidized bed dryers

Vibrating fluidized bed dryers can be said to be widely used. After use, maintenance and maintenance are required, which is beneficial to the longer service life of the linear vibration Fluidized Bed Dryer and reduces the occurrence of failures. How to maintain the bed Dryer on a daily basis? Here we summarize a few for your reference.

1. Regularly clean the main body of the equipment, the auxiliary pipelines and the use site to ensure that they are clean and free of dust, oil, grease and other debris. When cleaning, the power supply of the vibration motor should be cut off. Dry to prevent the bed from rusting.

2. Check the main body of the equipment and the auxiliary pipelines to ensure that the parts are complete and reliable, such as: whether the parts of the vibration motor, the equipment pipes, and the bolts of each connection are complete, check the working condition of the vibration isolation rubber spring, when the vibration isolation spring appears aging turtle When it is cracked or the installation height is lower than 105MM, it should be replaced. The free height error of each group of vibration isolation springs is not more than 3MM, etc.

3. Always check the connecting parts of the equipment and auxiliary keywords to ensure that they are tightened and ensure that the connecting bolts are not loose.

4. Always check the sealing surfaces to ensure that they are tight and leak-free, such as: sealing surfaces of the bed body, sealing surfaces of various pipe fittings, sealing surfaces of bearing glands and other sealing surfaces.

5. Check whether the anticorrosion and thermal insulation measures of equipment and auxiliary pipelines are good.

These are some maintenance methods of the linear Vibrating Fluidized Bed Dryer, of course, there are more maintenance, some of the above are for reference only, you can choose the appropriate way to maintain.